ENVIRO Foams
Our range of Enviro Fluorine-Free Foam Concentrates are completely free from fluorosurfactants and fluoropolymers and are 100% biodegradable and tested and approved to international or industry standards appropriate to the application.
Enviro Ultra - For use on Class B hydro-carbon fuels such as oil, diesel and gasoline fires. Also suitable for polar solvents such as IPA, Acetone, Ethanol & Methanol. Ideal for low and medium expansion branchpipes or monitors
Enviro 3x3 Plus / 3x6 Plus / 6x6 Plus - For use on Class B hydro-carbon fuels and polar solvents such as Isopropyl alcohol, Ethanol, Methanol, & Acetone. Ideal for low and medium expansion branchpipes or monitors
Enviro 3x3 Ultra - Use at 3% on Class B hydro-carbon fuels & polar solvents. For Class A fires use at between 0.3 %to 1%. Ideal for low and medium expansion branchpipes or monitors
Enviro USP - For use on Class B hydro-carbon fuels such as oil, diesel and aviation fuels. Also suitable for Class A fires such as wood, paper, textiles etc. Use at 2% with fresh water for low, medium and high expansion discharge devices. UL approved for use in sprinkler systems
Enviro LS EXP - Multi-purpose foam for use at low, medium or high expansion on Class B hydro-carbon fuels such as diesel, gasoline and aviation fuel. Tested with use of 'inside air' during a fire and showed good extinguishing of large Class A & B fires.
Enviro LS xMax - For use on Class B hydro-carbon fuels such as oil, diesel, gasoline and aviation fuels using all types of low, medium or high expansion discharge devices. Also highly effective for Class A fires
Enviro 3% ICAO - Formulated for aviation use when dealing with Class B hydro-carbon fuels and aviation kerosene or Jet A-1. Ideally suited for use in Aircraft Fir Rescue Vehicles, Rapid Intervention Vehicles and airport crash trucks.
Enviro AIR - For use on Class B hydro-carbon fuels Enviro AIR is particularly effective when used on kerosene or Jet A-1 fuel fires. Ideal for branchpipe or monitor discharge.
Enviro ARK - For use on Class B hydro-carbon fuels such as oil, diesel, gasoline as well as polar solvents. Also suitable for Class A fires such as wood, paper, textiles etc. Use at 3% with fresh water for low, medium and high expansion discharge devices.
Enviro Class A / Enviro Class A Super - Excellent performance on Class A fires thanks to deep water penetration capabilities when applied onto burning materials such as waste piles etc. Provides an insulating foam blanket over the fire to aid extinguishing. Use at between 0.1% & 1%.
MB-20 - For use on Class B hydro-carbon fuels such as oil, diesel, gasoline and aviation fuels using all types of low, medium or high expansion discharge devices. Also highly effective for Class A fires
Alpha A -35 Pre-Mix - For use on Class A fires this pre-mixed foam solution is ready-to-use and can be used with aspirated and non-aspirated discharge devices. Ideal for use in fire extinguishers and foam systems.
Trainer E-Lite - Combining good foaming properties with minimal negative environmental impact Trainer E-Lite is formulated for firefighter training and should not be used in live fire scenarios.
